How to Fix Lifted Shingles

Posted by roofcoadmin June 4, 2018

How to Avoid Algae from Stone Roof Shingles

It is important to replace or fix curled or torn asphalt shingles before the issue gets serious enough to allow leaks or pieces to break apart and then blow off of the roof.

If you do not have close-match replacement roof shingles, repairing a curled or torn shingle is going to be your best and easiest option. If you have replacement shingles which match the roof, on the other hand, entirely replacing a damaged shingle is going to result in less noticeable, better repair.

Shingles which lift up usually are an issue with homeowners who recently have put in a new roof within the last 6 months. There are many potential reasons; however, the most common one includes the shingle adhesive not having enough heat to completely seal, causing shingles to lift. Usually, lifting shingles occur on the north side of your home, as this side receives less sun. If you believe this is the case, wait a little longer for the adhesive to seal and your shingles naturally will repair themselves. Glue will work better as the temperature is above 50. Roofs that are installed right before the cool seasons may take until the following summer to completely lay flat.

After years of wind and harsh weather exposure, roof shingles often can curl and expose the below roof. Thankfully, it is possible to seal down those curled shingles and protect the wood surface beneath using a basic roof sealant. It’s an easy process which will require a standard red brick, roofing sealant, and caulking gun.

Things You Will Need

  • Red brick
  • Putty knife
  • Caulking gun
  • Roof sealant
  • Utility knife

In addition, wind can cause the roof shingles to lift up. If you need to repair this on your own, again, you will need: a utility knife, roof sealant, and a caulking gun. Follow the below steps to repair the roof shingles that are lifting up.

  1. At a 45-degree angle, cut the tip of the roofing sealant.
  1. Load it inside your caulking gun.
  1. With the utility knife, take the shingle off.
  1. Apply a good amount of roofing sealant.
  1. Push the shingle back into place.
  1. Weight the shingle down using a heavy object, like a brick, for a minimum of 24 hours.

In addition, defective shingles might be an issue, as some aren’t as resilient to moisture and temperature changes and are more susceptible to being bent out of shape. If you believe this might be the case, contact a shingle manufacturer.

Roof shingles might lift up because of a number of reasons, and to get the best idea why, it’s recommended that you locate a reliable inspector who will examine the roof. It also isn’t a good idea to repair an issue which affects a large space by yourself. Locate a highly rated and reliable roof company to assist you with the lifting shingles!

For more information on how to fix lifted shingles contact our reliable roofing company, Roofco today!