What Is Fascia Board Made Of?

Posted by roofcoadmin November 22, 2017

Are you planning to repair, replace or upgrade your current fascias? Have you considered the types of fascia boards that you will use based on its material? What is fascia board made of?

Fascias don’t only limit to beautifying your homes but also protect your roofing. Fascias safeguard your roof and rafters from decay, rot, and corrosion due to the changing weather. Installation of gutters is even easier if there are fascia boards.

In choosing your fascia boards, its material is essential to consider. Different types offer different advantages and disadvantages. One kind of fascia you may be best for others but not for you.

So what is fascia board made of?

You can choose from the different types of fascia materials in replacing your fascia boards. There are wood, composite, vinyl and aluminum materials that made a fascia.

composite fascia board

The Wood Types of Fascia Board

Wood is typically the most common fascia material. Wooden fascia boards can be made of spruce, pine or fir. This type of board is the least expensive.

Installation cost of wood fascia board is cheap, but its maintenance is costly. It needs regular repainting durability.

The Composite Types of Fascia Board

Type is environment-friendly, and rot and decay resistant. The composite lumber is made of mixed recycled plastic, sawdust and wood chips. This more expensive than wood fascias but more durable.

Repairs for this type is not easy as vinyl and woods. Additionally, you don’t have various options in repainting this fascia. Some paints don’t hold composite boards.

The Vinyl Types of Fascia Board

Vinyl fascia boards can attach directly to your current wood fascia. This type is accepted under building code standards. There is also a DIY kit for installation available in hardware stores.

Homeowners use this type of fascia board due to its ease of installation, durability and color availability. Vinyl fascia materials have low maintenance cost compared to woods. These are also cheaper when it comes to repairing than woods and aluminum.

However, this would immediately expand and contract when exposed to change in seasons. There must be a very tight seal to avoid water to drip through like sliding vinyl. Water may cause damages to the interior structure of your house.

The Aluminum Types of Fascia Board

Lastly, the aluminum fascia board that can protect your existing wood fascia from decay. Vinyl and aluminum have no cost difference, but installation costs of the latter are costly.

Many homeowners also choose aluminum material since its an easy upgrade from traditional wood fascias. The is easy to cut and trim to the desired size. Additionally, they deteriorate slowly; thus, last longer.

Aluminum materials come in various choices of colors that match your exterior design. This type is the easiest to paint among all fascia boards.

However, steel nails may react with the aluminum causing decay. Thinner aluminum can easily have dents. It’s better for you to purchase the thicker ones.

fascia material choice

Choose the Best!

Are you now enlightened what is fascia board made of?

The importance of fascia boards cannot be discounted. Thus, determining the material to use is critical. What’s best for others may not be best for you.

Consider the cost, durability and your personal preference in choosing the type of materials. Other materials may demand lower price upon installation but higher maintenance cost in the long run.

For a hassle-free upgrade, replacement or installation, you may contact your contractor now!