The Different Types of Gutter Protection of Gutter Guards for Your Home
Do you want to keep dried leaves and other debris out of your gutters without having to regularly clean them?
Then you must consider getting gutter protection for your house. Gutter protection is a good way for you to veer away from the messy task of constantly cleaning out the gutters of your house and for keeping it free of damages which debris can cause.
Presented here are the most common types of gutter protection you can choose from for your own use at home.
The Different Types of Gutter Protection or Gutter Guards
The Screens
The most popularly utilized gutter protection, screens, are available in a wide variety of shapes and materials, and can be installed in several ways.
They will work best for keeping out bigger debris, such as leaves. However, the gaps in the screens are still big enough for pine needles and seeds to pass through. This may require you to remove the screens in order to take them out of the gutter, which in a sense, adds a step to gutter cleaning.
Moreover, the screens themselves can become clogged with debris and other particles and dirt buildup. This will require you to clean the screens which can be a little tricky because some debris cannot just be blown off or brushed off the screens, especially if the accumulation is heavy and sticks to the screen of this type of gutter guard.
In terms of installation, screens are the most convenient and efficient gutter protection in that they will only need to be slid up under the roof shingles. In this case, the screens will be angled downward, which can be helpful in allowing the debris to slide off.
On the other hand, there are screens which are only dropped in. This type of gutter screen makes an ideal choice if your roofing shingles are too brittle to hold the screen or if your roofing system cannot be easily lifted up to slide the screen underneath it.
The Surface Tension
With surface tension gutter protection, the water hangs onto the rounded nose of the gutter guard and then flows off the gutter itself while leaves and other larger debris slide over the edge. This suggests the surface tension gutter protection works best with bigger rubble and fragments, and at the same time, with the smaller ones too, which are normally flushed out with the waters through the vertical pipes without being obstructed.
However, it is important to note the surface tension gutter protection works best if it is angled similarly to the slope of the roofing system. This is not entirely possible with long gutters since the gutters will need to be pitched so that the water can run off the pipes which suggests one of its ends will need to be hung high enough. This is the major drawback in the surface tension gutter protection. This type of gutter guard, if installed too high on the soffit panels, will cause larger debris to impede the flow of water alongside the other debris, which will collect more waste in the gutter.
The Fine Mesh
The fine mesh serves like screens in that they can block everything from obstructing the gutters except the smallest particles. While the tiny spaces in the fine mesh will not clog with pine needles and seeds, they can still get clogged with other small particles such as shingle sands and stones.
The advantage of fine mesh over screens is that fine mesh is much easier to clean by blowing or brushing off its surface and gaps.
Ultimately, the gutter guards are great a form of keeping your gutter cleaner than without them. However, it is important to remember these forms of gutter protection are not free of any maintenance. In fact, they will require cleaning and upkeep from time to time, only not as messy and taxing as cleaning the gutter itself.
The Best Roofing Contractor for Metal Shingles Installation in Chattanooga
A roof is an integral part of a residential or commercial building. The roof serves as the first line of defense against all natural hazards and more. A good roof can protect a structure from rain, hail, wind, extreme heat and many others. A roof also plays a major role in creating the image of the building. Having a good roof will most likely create not just a magnificent looking structure but also one that is well-protected from the elements. Asphalt and metal shingles are but two of many different types of roofing styles. Metal shingles may have a high price tag, but it looks beautiful and lasts for a very long time. For your residential or commercial building, know that you can to choose the type of roofing you need. For the best roofing contractor in Chattanooga, come to Roofing Chattanooga and have us setup the type of roof you need from the many great choices of roofs that we have to offer.
Asphalt and metal shingles are used on homes in Chattanooga
For many residential homes in Chattanooga, both asphalt and metal are used for roofing materials. Shingles are the overlapping of slates from the bottom part of the roof to the top. A slate is placed on top of another until the entire roof has been covered. A lot of materials could be used in creating roof singles such as stone, metal, wood, slate, plastic, cement, asphalt and much more. Asphalt and metal shingles are used on homes in Chattanooga. Asphalt shingles are the more cost-effective products in roof installation. Metal shingles may cost more, but the product when installed, looks grand and classy.
Roofing materials used for commercial buildings
There are a lot of roofing materials used for commercial buildings in Chattanooga. Extreme conditions are typical in Chattanooga and it is vital to have the top-rated roofing contractor to install excellent quality roofs. With Roofing Chattanooga, roofing materials used for commercial buildings are Ethylene Propylene Diene Terpolymer, coated roof systems, thermoplastic, metal shingles, slate roofing, modified bitumen, built-up roof, metal roof and we also have sustainable options available for a roofing system.
Other services offered by Roofing Chattanooga
Besides installation of roof for both residential and commercial buildings, other services offered by Roofing Chattanooga includes roof replacement, roof repairs and emergency roof repairs. When your roof already has signs such as missing asphalt or metal shingles, stains on interior, cracked shingles, drippings on walls and mold growth, you need to have your roof re-roofed or replaced. Otherwise, your home may suffer serious consequences. Besides services for both residential and commercial structures, other services offered by Roofing Chattanooga should also be considered especially for maintenance, roof strengthening and roof protection.
When in Chattanooga, know there is a top local roofing contractor you can contact for all your roofing concerns. Asphalt and metal shingles are materials available for residential buildings and there are a lot more options for commercial structures. Asphalt being more cost effective is the more commonly used material than metal shingles. The company also offers other roofing services such as re-roofing, roof replacement, roof repairs and more. For the best roof, go for Roofing Chattanooga.
The Different Types of Roof Sealer Products Available in the Market Today
Roof sealer products help prevent rainwater from permeating through the roofing materials of your building or your house. They are also designed to help prevent easy and premature breakdown or corrosion of your roof resulting from extreme weather conditions.
Roof sealer products differ in thickness and composition and their use will depend on your roofing materials.
The Different Types of Roof Sealer Products Available in the Market Today
The Acrylic Roof Sealer
The acrylic roof sealer is made up of different types of acrylic polymer and it is commonly designed and concocted to help extend the lifespan of the roofing and its coating through improving the durability and sturdiness.
The acrylic roof sealer is one of the different types of roof sealer products available in the market today that come in a variety of colors, although white is still the most common choice of homeowners as well as of building and facility operators, and even of roofing installers and contractors.
Owing to its inherent durable properties and relatively affordable pricing, the acrylic roof sealer is considered one of the best amongst the roof sealer products.
The acrylic roof sealer is usually applied in two coatings with the second coating running opposite the direction of the first coating. These coatings can either be roll-applied or sprayed.
The Asphalt Emulsions
Asphalt emulsions are sealers which, as per its name, are composed of emulsified or blended asphalt and of asphalt particles distributed in water. The mixing component utilized is clay.
The asphalt emulsions also consists of several types of organic and inorganic fillers and fibers which provide the sealer with enhanced strength. Unlike the acrylic roof sealer, they only come in shades of black, brown and a reflective sealer which is the result of the addition of titanium dioxide or aluminum pigments into the mixture.
The asphalt emulsions may as well be one of the best sealers in its own right, because of the ease of its application method.
The Solvent-Based Silicone Roof Sealer
Silicone roof sealers are usually formulated and manufactured by adding a compound or a substance and some solvents to a silicone base.
Silicone roof sealers are biodegradable because silicone is an inherently natural material. They are available in many different colors and can be applied to any roofing system with the use of various application methods, not limited to spraying and rolling.
Silicone roof sealers can be resistant to the accumulation of rainwater for longer periods of time, and can adhere to most roofing underlying layers without a primer. So although the other types of roof sealer products have their share of benefits, these two particular properties of silicone roof sealers give the product a major edge over the rest, basically because it encompasses both great quality and cost-efficiency.
The Solvent-Based Asphalt Roof Sealer
Solvent-based asphalt sealer is composed of solid asphalt having been liquefied or softened with a solvent. This also allows for easy application technique of the sealer, although it only comes in two colors, black and aluminum-finish.
Do you need roofing services such as repairs or replacement? Get in touch with the best roofing contractors in Winnipeg, Manitoba only at Roof Co.
The Most Common Roofing Styles for Homes
When installing a roof, choosing the right one is crucial so that you can be guaranteed its resilience and its energy efficiency as well as the general protection of your residential structure.
Your choice between the different types of roofs will also define the overall look and feel of your entire house.
There are many considerations when choosing the right roof for your home. Each type of roof has their own distinct and unique qualities which makes the task of deciding more difficult than it seems. Although through working with the right roofing company like, Roof Co in Winnipeg Manitoba, you can always arrive at the best decision and option.
The Most Common Roofing Styles
The Gambrel Roof
The gambrel roof is one of the most common roofing styles which is designed with two symmetrical and steeply lowering slopes on the sides and a shallow segment connecting the two sides on the upper section.
These slanted sides of the gambrel roof appear to be hanging over the façade of the residential structure.
The gambrel roof is the most usual choice amongst the different types of roofs for barns and outhouses.
The Flat Roof
Rather easy to identify, the flat roof is one of the simplest of the different types of roofs.
While the flat roof is most popularly used for commercial buildings and industrial structures such as offices, factories and warehouses, it is also a popular choice for homeowners. One of the reasons for this is because the flat space atop the house can literally be converted into a rooftop orchard or a rooftop garden where you and your family can relax or conduct a small gathering.
The flat roof has a slight pitch which allows for rainwater and other debris to drain and run off. This is the reason why it generally requires maintenance because it only features this slight tilt making the flat room more fitting for houses which are located in generally dry areas.
In terms of construction though, it is much easier to match with the walls and the entire structure of the house. This is because the flat roof has no specific requirements for the other components of the house to accurately correspond to its design. Therefore, it eliminates the need for any kinds of particular arrangement especially for the walls.
The Mansard Roof
The mansard roof is composed of two slopes on each of its two sides wherein the lower slope is steeper and almost vertical compared with the more shallow upper slope.
The mansard roof is the perfect choice for homeowners who have a penchant for creating and designing extra spaces for varying personal and individual purposes such as having an additional living room, or perhaps a convenient storage area for the house.
For roofing installation in your home in Winnipeg Manitoba, consult only with Roof Co.
Soffit Board Basics: What It Is, Its Uses and Its Materials
A soffit board is basically a material which serves as the connection between the roofing overhang or extension and the actual side of a building or of your home.
The soffit fascia board is most commonly utilized around a main roofing structure. Although, a soffit board can also be used under building arches, columns, under staircases, under porches, and nearly everything with a visible ceiling.
What are the Uses of a Soffit Board
The Aesthetic Purpose of a Soffit Board
The aesthetic purpose of a soffit board is that it serves as the skin which covers the attic or the roof spaces of a building or of your house. So basically a soffit, the rafter or joist beams will be completely exposed and visible which may not be comfortably pleasant to the eyes.
Therefore, a soffit provides for an added style, fashion and character to any structure in that you can choose its features, for instances, its color to match the design of the entire structure.
This is basically the aesthetic purpose of a soffit board.
The Functional Purposes of a Soffit Board
On the other hand, one of the functional purposes of a soffit board is that is serves as a protection of your joist or rafter beams from the effects of extreme weather conditions.
In this light, if your joist or rafter beams are exposed and visible in any of their segments, you are putting the structure’s roof at risk with so much chances of mold buildup or accumulation in your beams. This is definitely not healthy for the roof and even the structure itself in that it can be dangerous particularly if neglected or left unnoticed. This will mean corrosion or eventual collapse of the beams.
You will need to control these damages with rather expensive repairs or even replacement if needed.
In addition, another one of the functional purposes of a soffit board is that it keeps the structure well-vented. There will be sufficient and regular flow or circulation of air to the attic and other roof spaces from the outside atmosphere.
This sufficient and regular airflow is very important for the entire building or residential home. This is because if your attic or roof spaces are sealed airtight, they will attract and hold heat which will in turn, cause the attic to overheat.
When this happens, heat starts to get trapped in your home and can bring you discomfort inside the structure. This can even result in higher utility bills. Typically this will be the case during the hot summer days without a soffit installed in your structure.
While during the colder rainy season or winter months, rain and snow will lead to moisture buildup or accumulation in your joist or rafter beams. With the effects of molds in the beams, moisture can also cause corrosion and rotting of the rafters and the sheathing.
Therefore, you need a soffit fascia board to keep your roof from drawing in and holding heat or moisture. A soffit hence protects the roof frame and helps with good air circulation to and from the roof spaces and the building or house itself.
These are essentially the functional purposes of soffit board installed in your roofing structure.
The Material Composition of a Soffit
A soffit board can be made out of aluminum and vinyl which are the most common choices of its material composition although it can also be made out of fiber cement, steel, or wood.
Does your building or house need exterior services for or apart from soffit installation? Get in touch with Roof Co via (204) 487-7663. Our other clients who had soffit boards installed in their homes and office buildings are also interested in learning more about fascia, siding and shutters, and eavestroughs.
Tips for Choosing the Right Roofing Contractors in Winnipeg
The competition amongst residential roofing contractors in Winnipeg is tight and so you truly have to be careful and meticulous when hiring the services of a roofing company.
Presented here are tips for choosing the right roofing contractors to cater to your roofing needs in Winnipeg.
Insurance Is Mandatory
Be sure that your roofing contractors have worker’s compensation and liability insurance.
To be certain, ask for their certificates, paperwork and other documentations proving that they have the necessary insurance to have you and your home covered for your own protection.
To further validate the proof of insurance presented, you can always choose to get in touch with the insurance carrier to verify the validity of the insurance of your roofing contractors.
This is to keep all the costs of the actual roofing materials as well as the labor and the services protected with the security of coverage provided by the worker’s compensation and liability insurance.
Choose Local Roofing Contractors in Winnipeg
Be sure that the roofing company of your choice is local. This will indicate that they have an established, thriving, and reputable business in the community. It will be easier for you to find first-hand reviews and recommendations from within your community from their previous and also regular clients.
In addition, it will be easier for you to be in touch with them should there be any issues or problems with the roofing that they have installed or repaired.
You have to make sure that the roofing contractors of your choice will be around for the coming years. This is because most of them will offer the usual and standard five-year warranty. You would not want to deal with a roofing company that will end up closing or has the tendency to move to another city especially when you need them to return for further roofing procedures.
Expensive Does Not Necessarily Mean Good Quality
Do not choose roofing contractors solely based on pricing.
Do not allow yourself to be fooled by higher costs being equivalent to excellent roofing work. In many cases, where there is expertise, there is also affordability in pricing.
Every Step in the Roofing Job Needs to Be in Writing
This will help you identify and determine the breakdown of the costs involved. As well, you will know exactly what will happen on your roof as they install or repair your roofing.
This will also give you an idea of the duration of work before the actual completion of the roofing job. Hence, having every step and pricing breakdown as well as the projected timeline of the project will be very beneficial to you and your pocket.
Contractors in Winnipeg & Excellent Customer Service
The reason for this is because clear communication between you, the client, and the roofing company of your choice is a must. This is also a key element in the success of the project.
Be sure to observe if their customer care representatives and assistants are mindful of your needs and respond to your questions with prompt, ease, and expertise.
If you are getting all these, then your roofing will be in expert hands just like it will be with the reliable and reputable Roof Co, which house some of the best and most exceptional roofing contractors in Winnipeg.
Flat Roof Replacement Tips
The cost of roof replacement and repair may be expensive. But it is necessary given that your roof functions as your primary insulation (together with your walls) and protection against harsh environmental elements like severe weather.
There are many options available for flat roof replacement, like following leaky roof repair do it yourself tips or simply hiring local roof repair contractors. At this rate, it is important to use the best flat roof repair products and materials to ensure that you are getting the best possible return on your investment.
With these in mind, you are going to need a guide on the basics of roofing repair and maintenance services to help you replace your damaged roofs and stop the leaks from destroying your home.
Flat Roof Replacement, Repair and Maintenance Services
The roofing systems serve a crucial function for your house. First, your roofing insulates the house from the extremes of temperature. Second, your roofing also protects you from the weather, UV light, and strong winds. In turn, having a well-maintained flat roof can save you from potential costs in the long run.
This is because it enhances the efficiency of your HVAC system and it also minimizes the need to frequently repair your roof. Also, it can prevent the need for total flat roof replacement, especially since they can last longer that way.
Leaking Roof Repairs: Do It Yourself Tips Using Flat Roof Repair Products
As mentioned earlier, there are several options you can follow to help you maintain the structural durability of your building. As soon as the water starts to leak through your roof, you need to fix it as soon as possible.
If the need for it is immediate, it pays if you know how to do it yourself by reading leaking roof repair tips using flat roof repair products. The danger of doing it on your own, however, lies on how durable and complete your work is.
If it is your first time using flat roof repair products, then you should contact your local roof repair contractors immediately to remediate the damage. This can save you from needing complete flat roof replacement.
Local Roof Repair Contractors: When to Ask for Help
On average, homeadvisor lists minor damages as something that you can fix on your own. However, DIY fixes may be insufficient once the damage is so substantial that you need total flat roof replacement and installation just to save the rest of your house from sustaining even more damage.
At this rate, getting a quote from contractors that install and repair roofs is necessary. A commercial roofer can help you prevent future problems at a reasonable price. Prices may vary among local roof repair contractors when it comes to their flat roof replacement services.
So it pays to know where to look for commercial roofers who can check your building and provide general maintenance and repair services for your roof.
You might think that roofers only entail additional expenses, but in the long run, they can help you perform tasks which are crucial for your building. You may pay a sum of money now, but it can help you save money in the long run.
Roofing Maintenance Using Roofing Materials
Roofing Maintenance
The structural integrity of your house requires frequent maintenance, as leaving damages unattended can lead to serious consequences. Erratic weather is the number one enemy that most homeowners in Canada face. These erratic weather patterns are the main reason why roofing materials sustain severe damages every year.
The average cost of roof replacement may vary, but it is important to buy the most durable roofing material from your local contractors and commercial supply company to ensure that you will receive a favorable return on your investment. With this in mind, you should know what the different types of residential roofing materials are, and select which ones are the best for your renovations.
How To Find Roofing Materials
Getting the best supplies when it comes to roofing for your house or business establishment is important. This roof will serve as an investment to enhance your protection against harsh environmental elements.
Also, roofing materials also improve your insulation system’s efficiency which can help you save money in the long run. Here are a few tips to help you find the best roofing materials from a reputable distributor:
1. Know what the different types of residential roofing materials are.
2. Determine the most durable roofing material.
3. Determine the average cost of roof replacement and make a budget.
4. Look for contractors or a supply company with an address based in Manitoba or from your nearest neighboring state in Canada (preferably a few hours away at the most).
5. Contact companies by phone and check the products they are selling.
Types of Residential Roofing Materials
As you look for contractors based in Manitoba, it is also important that you know the different types of residential roofing materials available for you to select from. You will want to choose the most durable roofing materials. These types are:
1. Metal roofing
2. Shingles
3. Flat roofing
Each of these types can be further categorized into different subtypes. It is important to have a clear goal in mind before you buy one, given that renovations can be challenging.
How to Select the Most Durable Roofing Material
Here are a few tips on how to select the most durable roofing material:
1. Determine which materials suit your needs.
2. Compare the natural properties of each type and how these materials can help protect your building.
3. Check for listings of contractors and look at how they fare in their reviews and ratings on their services.
4. When you do buy one, make sure that you get the best quality for your roof.
Estimating the Average Cost of Roof Replacement
With the things mentioned above, estimating the average cost of roof replacement can help you allocate a budget for your maintenance. Check out the quotes which will be provided by your friendly local contractors. Compare and determine which company can give you the highest offers to help you with your project.
With these in mind, getting the best products to use on your roof repair and maintenance routine can help you achieve your desired outcome to enhance your house’s roofing durability. There are several ways that you can do so, but it is important to know how to find local contractors, and select the most durable materials from the different types available. Lastly, estimate how much it will cost you so that you can allocate a budget beforehand.
Fixing Roof Leaks With Roofing Repair Products And Services
Maintaining a sound structure for your house is essential. A roof functions as your primary protection against harsh environmental elements such as UV rays, extreme temperature, rain, and many other natural occurrences.
When your roof leaks in heavy rain, you are not only placing your house in jeopardy but the safety of you and your family in jeopardy as well. Hence, the need to learn how to patch a roof leak quickly with simple roofing repair procedures is apparent.
Since roof leaks in heavy rain can cause so much damage when left unattended, this becomes a serious safety hazard. In case you have limited knowledge when it comes to roof repair, then roofing and repair services can be the best option.
Dangers Of Roof Leaks In Heavy Rain
Many residential and commercial roofers agree that your roof needs frequent maintenance and service to minimize its need for repairs. With this in mind, contractors from any given area will recommend that you repair roof leaks due to heavy rain immediately.
This can actually lead to disastrous outcomes. When liquid starts leaking through your roof, it can mean that your house’s entire structural integrity is in danger. As a roof leaks from heavy rain, it will cause your ceiling to begin to rot, especially if the materials used are mostly organic (like wood).
With these factors in mind, it will also lead to further damage to your electrical wiring system, and this can become very dangerous for you and your family. Hence, having emergency roofing repair products on hand is important for you to patch a roof leak quickly.
How to Patch a Roof Leak
With the premises above, here are several ways on how to repair your roof quickly in case you can’t get immediate roofing and repair services:
1. Look for any signs of damage on your roof or ceiling.
2. Apply the appropriate roofing repair procedures on your damaged roof. These may include:
a. Straightening bent shingles or replacing severely damaged ones.
b. Reinforcing the attachment of your shingles using asphalt cement.
c. Using roofing repair supplies such as sealants, coatings, and many others.
These tips mentioned above are only some of the things that a contractor would do upon inspection. At this rate, getting the best roofing repair products is important as you learn how to patch a roof leak.
Roofing Repair Products
Like many homeowners, it is your primary job to maintain your home’s efficiency. To do so, you must have a set of standards for the roofing repair products you use to maximize your efficiency. These traits are:
1. Durability
2. Functionality
3. Affordability
4. Availability
The mentioned traits above are things that homeowners should consider before buying roofing repair products and tools. As mentioned above, getting roofing and repair services can be a game changer. They can help you fix your leaking roof, hassle free.
Availing Roofing and Repair Services
One of the wisest decisions you can make is to hire a roofer or an installer of roofs to help you do the job with less hassle to none. It eliminates the need of using tape to cover up the leak or any other related DIY solutions which can become a waste of time, effort and money.
Read reviews of your prospect company first before you hire a professional contractor from your area. Select the materials you want to use on your metal roof, and make sure that you are getting the best quality from the shop.
Ultimately, getting your roof leaks repaired is important, as it can help you achieve sturdy roofing capable of protecting a house’s inhabitants. Learn how to fix leaks quickly using roofing tools for repair but in case it becomes too difficult, seek professional roofing and repair services.
Selecting From Different Types Of Exterior Siding
Enhancing the structural durability of your home is necessary, given it can save you a lot of time, money and effort on frequent repairs and replacements. Structural enhancements not only make structures more durable, but also adds aesthetic value to the property, which is why the best type of home siding among the different types of exterior siding should be chosen for your house.
There are many popular siding ideas which can guide you with buying the best materials you should use to be installed, especially if you want to modernize the design. With this in mind, you should estimate the cost of your siding to ensure you will be getting the best materials.
Types Of Exterior Siding
There are many options of siding you can use for your building. There are many choices for specialized siding for interior and exterior walls. Here are a few of the most common types of exterior siding:
1. Vinyl.
2. Wood.
3. Brick.
4. Fiber Cement.
5. Non-wood synthetic siding (such as stone).
These can add value to your property, given each variant has its own set of strengths and weaknesses.
Selecting the Best Type of Home Siding
Before you begin the installation process of siding for your home, you should know how to select the best type of home siding which will suit your needs. The best types are:
1. Durable.
2. Flexible and easy to paint.
3. Easy to repair.
4. Easy to install.
5. Affordable.
6. Readily available.
How to Find DIY House Siding Ideas
There are many exterior siding ideas a customer can choose from, but sometimes, you can also do it yourself. If you want to find easy, creative house siding ideas, you should:
1. Search the internet.
2. Read magazines, newspapers and coffee table books for ideas.
These should be sufficient to get you started with your exterior siding installation. If you find it difficult to do so, you may also consult professionals like us, for ideas to give you an estimate.
Why You Should Determine Your House Siding Cost
Here are several reasons why you should estimate home siding costs:
1. It can help you anticipate the budget you need and start saving.
2. It can help you select the type of siding design you desire.
There are many types of exterior siding, and each type has its advantages and disadvantages. Before installing one, you should determine the best qualities of siding and look for ideas which will suit your budget. That way, you can add value to your property at a reasonable price.
No matter what issues or questions that you may have, RoofCo is here to help. We will make sure that the siding you choose is of the highest quality and the most affordable price on the market. Ensuring that the material you choose will help insulate your home is crucial yet often overlooked by most homeowners. That is the sort of thing that we will help you decide. If you need some advice when it comes to choosing your external siding material, we will help you.
So if you need to update or repair your siding, RoofCo is here for you.